Pass MMS XinePlayer/Mplayer-Audio through on-board HDMI?

Discussions regarding standard plugins shipped with mms

Moderator: Moderator

Posts: 16
Joined: Fri Feb 29, 2008 12:16 pm

Pass MMS XinePlayer/Mplayer-Audio through on-board HDMI?

Postby komkon2 » Fri Dec 25, 2009 8:28 am

Hello. I have MMS and VDR on my Computer installed. Generally is the Combination very usable. The only one Problem I have: Audio-output from Xine Player (used for MP3s, Waves, Radio, etc.) and Mplayer (used for Movies) works only to analog sound-card output. I had no Success to put it through the on-board HDMI. VDR-SXFE does it with the option “--audio=alsa:hw:0,3” perfect (xineliboutput). Would you help me to put Audio both through analog and HDMI (or just only to HDMI for all cases)?

My Config.

# lspci -v

02:00.0 VGA compatible controller: nVidia Corporation GeForce 8300 (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 82f2
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (64-bit, prefetchable) [size=128M]
Memory at fa000000 (64-bit, prefetchable) [size=32M]
I/O ports at ec00 [size=128]
[virtual] Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

# aplay -l

**** Liste der Hardware-Geraete (PLAYBACK) ****
Karte 0: NVidia [HDA NVidia], Geraet 0: ALC1200 Analog [ALC1200 Analog]
Sub-Geraete: 0/1
Sub-Geraet #0: subdevice #0
Karte 0: NVidia [HDA NVidia], Geraet 1: ALC1200 Digital [ALC1200 Digital]
Sub-Geraete: 1/1
Sub-Geraet #0: subdevice #0
Karte 0: NVidia [HDA NVidia], Geraet 3: NVIDIA HDMI [NVIDIA HDMI]
Sub-Geraete: 1/1
Sub-Geraet #0: subdevice #0

Debian 5.0
NVIDIA- Proprietary driver
mms 1.1.1
VDR 1.7.0

Thank you for advance.

Return to “standard-plugins”

Who is online

Users browsing this forum: No registered users and 1 guest