LIRC with Nexus-S rev2.X

problems with keyboard, lirc or evdev

Moderator: Moderator

gandalf
Posts: 1
Joined: Thu Jul 12, 2007 11:23 am

LIRC with Nexus-S rev2.X

Postby gandalf » Thu Jul 12, 2007 11:40 am

Hi,

I want to use the IR receiver on my Nexus (registered as /dev/input/event3) with lirc, in order to get MMS to work.

The next step would then be integrate my working VDR installation as TV app, but... one step at a time!

I am loading the lirc_i2c module, which is supposed to be working with the Nexus cards, but it does not create a /dev/lirc/[n] device, so lircd can obviously not use it.

Any ideas what I can have forgotten.

My /etc/lirc/hardware.conf

Code: Select all

# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER=""
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=""
MODULES="lirc_i2c"

# Default configuration files for your hardware if any
LIRCD_CONF=""
LIRCMD_CONF=""


My /etc/lirc/lircd.conf

Code: Select all

#
# this config file was automatically generated
# using lirc-0.7.0pre4(serial) on Sun Oct  2 00:24:
#
# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
# members of linux user group Vorarlberg www.lugv.at
#
# for ir remote controler from Hauppauge WinTV Nexus-S
# most of the keys are supported
#
# brand:                       Hauppauge
# model no. of remote control: WinTV Nexus-S
# devices being controlled by this remote:
#

begin remote

  name  Hauppauge_WinTV_Nexus-S
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           944   828
  zero          944   828
  plead         980
  gap         
  min_repeat      1
  toggle_bit      2


      begin codes
          Up                       0x
          Down                     0x
          Left                     0x
          Right                    0x
          Power                    0xBD
          Ok                       0xA5
          Menu                     0xD
          Back                     0xF
          Red                      0xB
          Green                    0xAE
          Yellow                   0xB8
          Blue                     0xA9
          0                        0x
          1                        0x
          2                        0x
          3                        0x
          4                        0x
          5                        0x
          6                        0x
          7                        0x
          8                        0x
          9                        0x
          Play                     0x00000000000017B5
          Pause                    0x00000000000017B0
          Stop                     0x00000000000017B6
          Record                   0x00000000000017B7
          FastFwd                  0x00000000000017B4
          FastRwd                  0x00000000000017B2
          Channel+                 0x00000000000017A0
          Channel-                 0x00000000000017A1
          Volume+                  0x
          Volume-                  0x
          Mute                     0x000000000000178F
          Timers                   0x000000000000178A
          Recordings               0x000000000000178E
          Back                     0x000000000000179F
          Record                   0x00000000000017B7
          Pause                    0x00000000000017B0
      end codes

end remote

Trying to use MMS and VDR on the same server
Silverstone case, AMD Athlon +, 1G RAM, 1*FF Technotrend/Hauppauge WinTV Nexus-S rev2.X, 1* Budget: AVermedia AverTV DVB-T 771, 1* internal HD 360 Gig, 1* external USB disk 500 G



Return to “input”

Who is online

Users browsing this forum: No registered users and 1 guest